InventorCAM 2021 SP4 HF2 Build 128303

Languages Supported: 中文, Čeština, Dansk, Nederlands, English, Français, Deutsch, עברית, Magyar,
Italiano, 日本語, 한국어, Polski, Português, Русский, Español, Türkçe
Product:InventorCAM
Version:2021 SP4 HF2 Build 128303
Supported Architectures:x64
Website Home Page :www.solidcam.com
Languages Supported:multilanguage
System Requirements:Windows *
Software Prerequisites:InventorCAM 2018-2022
Size:4.9 Gb


SolidCAM is pleased to announce the availability of new version CAM software - InventorCAM 2021 SP4 HF2. Base release added Powerful New Tool Table - ToolKit (important especially for Mill-Turn & Swiss-Type customers) and also provides additional advanced functionality in all modules - 2.5D Milling, HSR, HSM, Sim. 5x, Mill-Turn and Swiss-Type.

InventorCAM 2021 SP4 HF2 Release Notes - Date: March 30, 2022

SOL-16700 Turning/Cycle-simulation/Last pass been run twice
SOL-17429 Turning/Selection an internal tool should select internal strategy by default
SOL-17453 Turning/SolidVerify/Setup2/broken Tools
SOL-17587 turning grooving / bad result with Rough offset type ZX_ABS
SOL-17596 turningupdate material is wrong in turn operation
SOL-17626 Convert groove tool-old and composite problems
SOL-17635 Drill Recognition / During cross hole selection, Hole is divided into two segments
SOL-17654 Tool path preview is not possible on UI
SOL-17700 menu- you get Documantation DPP instead of "Add turning operation"
SOL-17863 Simulation with STL Insert is not correct
SOL-18000 Turning tool is wrong in SolidVerify
SOL-18260 The step on Z axis is not like chosen.
SOL-18515 ntttool milling Bore looks incorrect in sc2021 in Tool viewer Fixed
SOL-18539 HostCAD simulation / Transformation ( Rotate) / Tool is not in correct orientation for Rotate command
SOL-18660 sv simulationincorrect update material in sc2021 (message about crash)
SOL-18686 NTTcrash in calculste attached part after convert
SOL-19368 ToolKit/Corrupted Inch-Metric Conversion
SOL-20132 Why Did we change Diameter in SP4?
SOL-20399 Drilling jobs no longer recognize tool for automatic cycle selection
SOL-20403 Calculated operation show error "Operation is not saved"
SOL-20447 HSM/Wrong convert for spin for part from SC2019
SOL-20459 Turning || If the insert is not planar to XZ plane, we get wrong spindle orientation values
SOL-20526 CAM tree || Stock & Target is Lost after synchronization.
SOL-20529 Toolkit/Refresh issue for imported tool
SOL-20535 G-code/Plane angles incorrect with angular head tool
SOL-20537 NTT/ 2021 SP4 Crashes On Tool delete
SOL-20574 NTT - Convert Part from SC2020 to SC2021 - Adaptor Units problem
SOL-20589 iMachining || Mirror issue
SOL-20615 Drag&Drop multiple tools from one Magazine to another moves only one tool
SOL-20635 Turning | Wrong Changebit of feed in @line
SOL-20656 Will not update cam part from SC2020 to 2021sp4 without crashing immediately
SOL-20665 Drill detection doesn't works, impossible to select geometry
SOL-20670 CAMPart/missing conversion message
SOL-20681 iMachining_and_gen_procs_with_false_relative_coordinates_in_@arc
SOL-20683 cam settinggeometry-offset is in mm instead of inch after install
SOL-20695 Maximum Speed is not considered
SOL-20696 Collisions machine simulation
SOL-20703 used memory is doubled with every save & exit of an operation
SOL-20708 HSR/HSM | Operation remains not calculated after Save&Exit
SOL-20711 HSS || Gouge check for model || Mirror Issue 2
SOL-20716 Swarf || Check surface geometry issue
SOL-20721 HSR/HSM | Operation is not calculated with "Calculate minimum tool length"
SOL-20724 HostCAD/Tool is tilted wrongly
SOL-20750 NTTinternal-thread type-view->turret coord system is not in the center
SOL-20764 VMID/I can rearrange items on the list
SOL-20777 SolidCAM freezes while using Job-Templates and Toolkit
SOL-20788 G-code/Wrong rtpos for turn drill operation
SOL-20792 ToolKit table/get twice cutting point.
SOL-20795 millturnoperation drill-milling not calculated and there is crash in edit this job
SOL-20798 NTT/Tooltip is wrong for Cutter name in ToolKit if language of SC is not English
SOL-20802 Simulation/Tool orientation wrong in host cad
SOL-20812 Getting more than 1 cutting point in old part been converted to SC2021
SOL-20820 Mill-Turn/ G-code in Cartesian job is wrong
SOL-20827 NTT/Tool mounting problem in SC2021 SP4 HF1
SOL-20830 Milling/Optimize Operation Loops
SOL-20838 Face Milling | G-Code and MachPreview (G-Code Mode) are not Possible
SOL-20853 Turning | Wrong Changebit of feed in @line
SOL-20863 Incorrect Conversion When Defining Int. Thread Tool SC2021SP4HF1
SOL-20870 nttconnection during the tool turning definition- insert and after that shank looks incorrect
SOL-20886 Machprocdefine new Mach proc -turningadd tool -crash
SOL-20909 NTT/Tool Adaptors/Issue with adaptor values being converted from Inch to Metric
SOL-21040 Mill/ Getting unused @plane_data in G-code
SOL-21035 Gcode/PTM = no/face4x + change bits
SOL-20947 3D HSR/Tool path calculated with different tool diameter